What is EDCAM ?
No mistake - manual-input is unnecessary
Less setup time - dry-run can be skipped
Easy programming
Utilizing 3D CAD model, machining program can be created on the user-friendly graphical screen.
Automatic model recognition
EDCAM recognizes electrodes and workpiece automatically in importing 3D CAD model.
Additionally, also getting information such as machining position, machining area and machining dept.
There is no chance of mistakes by manual-input.
- Electrode models must be located at the discharge machining end position.
- Usable 3D model format
- Standard : Parasolid, IGES, STEP
- Optional : CATIA V5
Same user interface as the EDM machine's operation panel
Operator can create a program easily on the project screen,which is totally same as the EDM machine's operation panel.
There is no need to master how to use.
Controller : Hyper i
Dry-run simulation
Dry-run is performed on PC.
It is possible to check machining position, electrode shape, interference between electrode and workpiece, etc.
Interference parts are displayed with particular color.
(Red part of the above figure)
Electrode measuring
Measuring program is generated simply by inputting the point to be measured on 3D model. Operator can avoid mistakes caused by manual input.
- Blue : Contacted, Red : Crashed, Yellow : Not-contacted